If you have a Lexus RX400h, then you may be familiar with the Vehicle Stability Control (VSC) light. This light comes on when there is a problem with the VSC system, and it’s important to reset it as soon as possible. Here’s how to do it:
1. Turn off the car and close all the doors.
2. Remove the key from the ignition and open the driver’s side door.
3. Make sure the light is off and there is no movement, then hold down the power button inside of the glove box and continue to hold for 5 seconds after you hear a beep come from under your passenger seat.
4. The VSC light will now be reset. You can close the glove box and start your car.
If you ever have any problems with the VSC system, it’s important to get them fixed as soon as possible. Make sure to always follow the instructions above to properly reset the light.
What is vsc light on lexus rx400h?
In most vehicles, the VSC light indicates a problem with the stability control system. In the Lexus RX400h and GS300, this is an indication of something wrong with the accelerator pedal. When resetting this light is necessary, it will usually be accompanied by no forward motion under acceleration and power reduction while accelerating.
How long does it take to reset vsc light on lexus rx400h?
The time it takes to reset the VSC light varies depending on if you have a certain Lexus. For vehicles with a GS300 and RX400h, it usually takes about 5 seconds.
Where is the VSC button located on a Lexus RX400h?
The VSC button is located inside the glove box. You will need to turn off the car, open the driver’s side door, and make sure the light is off before holding it down for 5 seconds.
