A BMW 520d typically takes around 5.2 liters of oil, although this may vary depending on the age and make of your car. It’s important to check your owner’s manual to find out exactly how much oil your car needs, as putting in too much or too little can cause problems.
What factors affect how much oil your BMW 520d takes
The age of your car will affect how much oil it needs – older cars tend to use more. Your manual should contain a guide as to what the average is for your model.
You should also check the make and model of the car you have, as each one will be different; some may need slightly more or less than the average, as stated in your owner’s manual.
Another factor that affects how much oil your car needs is driving habits – if you do a lot of high-speed driving, your car will use more oil.
How to check how much oil your BMW 520d has
There are three ways to check how much oil is in your car:
• the dipstick: this is the most common way to check, and is generally found under the bonnet;
• the oil filler cap: this is located on the top of the engine;
• the oil level sensor: this is a newer way to check, and can be found on the dashboard.
What oil does a BMW 520d take?
Most BMW 520ds take 5.2 litres of SAE 5W-30 semi synthetic oil, although the owner’s manual should be able to give you more accurate information.
How to put oil in your BMW 520d?
To put oil in your car, you need to locate the dipstick, which is usually found near the engine under the bonnet. Remove the dipstick and wipe it clean with a cloth, then put it back in and pull it out again. The oil level will be indicated on the stick – if it’s below the ‘Min’ mark, you need to add more oil.
To add oil, locate the oil filler cap on the top of the engine, and unscrew it. Add the oil slowly, making sure it doesn’t overfill, then tighten the cap again.
