Make sure the oven door lock switches and wiring are working properly. Make sure the lock switch isn’t stuck.
Table of Contents
How do I fix error code F9?
Restart the Oven.In some cases, the F9 error code is the result of a magnetic fault in the circuitry. It is possible to fix the F9 error by disconnecting the oven’s power for five minutes.
Why is my Whirlpool stove saying F9?
A power outage could cause the control to display the F9, E0, or PF Error Code if the power supply line “noise” was detected by the control as an incorrect voltage amount.
How do you reset the code on a Whirlpool stove?
Reduce power for one (1) minute by turning off the circuit breakers. Turn the circuit breaker on to power up the unit (s). Begin a baking process by pressing start. For one (1) minute, keep an eye on the oven to make sure the error code does not reappear.
What does F9 on oven mean?
It’s possible that a General Electric oven’s electronic control system has detected a problem with the automatic door lock, resulting in an F9 error message. Oven doors cannot be opened while in “Clean” mode because of the automatic door lock mechanism.
What does F9 mean on a gas stove?
After 5 minutes of preheating, if the error code “F-9” appears on the Control Panel Display, the oven has failed. To silence the beeping alarm, instruct the customer to press the Clear/Off button.
How do I put my Whirlpool oven in diagnostic mode?
Within a 5-second window, press CANCEL>CANCEL>START to enter diagnostics mode. The oven will stop working if you enter diagnostic mode. Only after the oven has cooled down can you access the Diagnostics mode. When the oven door is open, all of the oven’s elements (depending on the cycle being used) will be activated.
Why is my Whirlpool oven door locked?
During the Self-Clean cycle, the door is locked.If you accidentally started the oven clean cycle, simply press the Cancel/Off key to stop it. To open the oven door, the oven must cool to approximately 200F(95C). Allow the oven to cool for 30 to 90 minutes before unlocking the door by moving the latch arm to the left.
How do you remove the lock on a Whirlpool oven?
Reset the latch by pressing CANCEL/OFF. Do not attempt to open the door until you have waited 20-30 seconds. Using a circuit breaker, turn the oven’s power off for one minute, then turn it back on. As a precaution, you should unlock the latch.
How do I stop my Whirlpool stove from beeping?
A faulty temperature gauge, control panel, or keypad can cause a Whirlpool oven to keep beeping. What do you mean? Your Whirlpool oven may have a problem if it keeps beeping incessantly. Pressing the cancel button and then restarting the oven can fix the problem in some cases.
Why is my Whirlpool oven not heating up?
A faulty bake element is frequently to blame for an electric oven that won’t heat up. The metal coil at the base of electric ovens serves as the heating element for this Whirlpool oven. A current of electricity flows through the oven’s coil, heating wires inside and generating heat that is used in the cooking process.
