How To Reset Engine Coolant Temperature Sensor?
1. Start the engine, let it idle for a while, then turn it off.
2. Wait for a few minutes before doing the next step.
3. With the key in the “ON” position and without starting the engine, press and hold down the accelerator pedal for 5 seconds or more.
4. Release the accelerator pedal then turn on the ignition. The ECU will reset itself automatically and displays Code 43 (Engine Coolant Temperature Sensor) OFF after three seconds.
Table of Contents
Is there a fuse for coolant temperature sensor?
There isn’t one in the strictest sense of the word. You should check your owner’s manual to find out which fuse supplies power to your instrument cluster, but the temperature sensor generates variable “resistance to ground,” which the dash temperature gauge reflects.
Why is my car reading the wrong temperature?
Your car’s display can be 10-20 degrees higher than the actual air temperature on hot summer days. Your car is actually taking a reading of the heat that is re-emitted from the road. On days with a lot of sunshine, you can expect a very high temperature reading.
Why is my temperature gauge going up and down but not overheating?
Having a faulty cooling system is a common cause of your car’s temperature gauge rising and falling and no heat being emitted. The heater core, radiator hose, coolant level, thermostat, or water pump could be clogged. Sediment or rust may have clogged the coolant passageway.
How do you check a temperature sensor?
Wait a few seconds for your multimeter to take a reading after submerging your temperature sensor in the hot water. Make a note of what you’ve read so you have it handy when you need it. Hot water readings are typically accurate to within.
Where is coolant temperature sensor?
When the coolant temperature sensor (CTS) is placed close to the engine thermostat, the engine runs more efficiently. Engine coolant is likely to be near the CTS’s tailpiece.
Does temperature sensor need calibration?
The accuracy of the temperature measurement loop is dependent on the accuracy of the temperature sensor. Calibrating a temperature sensor is just like calibrating any other measurement instrument.
Can you unplug coolant level sensor?
Located in the coolant reservoir bottle, the coolant sensor Only the reservoir can be replaced; it cannot be serviced. The coolant reservoir bottle sensor can also be disconnected if the problem is with the coolant.
Can a coolant temp sensor keep a car from starting?
Using the sensor will not result in an engine that won’t start up. Only a rich or lean condition could be a result of this.
What happens when a coolant temp sensor fails?
The computer may receive cold signals from the computer’s coolant temperature sensor if it malfunctions. Computers are tricked into over-enriching fuel mixtures when they perform actions like this. When the fuel mixture is too lively, the combustion chamber may be unable to consume all of the fuel during combustion.
Does coolant temp sensor affect AC?
Inconsistency in the coolingInconsistent cooling is another sign of a bad or failing ambient temperature sensor. Temperature sensors play an important role in controlling the AC system, so if they fail, the system’s ability to cool down the vehicle may be affected.
