Capacity of 2 x 10 floor joistsIn addition to the 40 pounds per square foot (psf) of live load, 2×10 floor beams can support a 10 psf dead load. A 2×10 joist can span a maximum of 40 psf while maintaining its structural integrity, according to a joist span table.
Table of Contents
How far can a 2×10 span without support?
A non-storage attic can span 26 feet or more with all SS, #1, and #2 2x10s, except for #2 Southern pine which can only reach 25 feet 7 inches at 16″ centers. #2-DF-L spans 23′-3″, #2-Hem-Fir 22′-7″, #2-SP 20′-11″ and a #2-SPF spans 22.2’11” at 24″ centers.
How much weight can 2×12 floor joists hold?
In total, a 2×12 is capable of holding approximately 180 pounds per foot, or 2,100 pounds.
How much weight can my floor joists support?
At least 40 pounds per square foot, joists must be able to withstand the live load. However, the joists’ span would need to be reduced to 11 feet 11 inches in order to safely support heavier weight when using the 50 pounds per square foot live load/10 pounds per square foot dead load table.
How much weight can a 2×10 deck support?
In fact, a 2×10 can bear 1,200 pounds of weight. It is important to note that the term “clear spans” is used to refer to spans.
Can you use 2×10 for floor joist?
Floor joists can span up to 14 feet if they are not cantilevered and end with a support on either end with 16″ spacing. You can span 11′ 5″ with one 2×10 Joist, which is 24 inches apart from each other.
How far can you cantilever a 2×10 floor joist?
Cantilever JoistsNew span tables and IRC provisions allow cantilevers to extend up to one-fourth the backspan of a joist, if necessary. Using southern pine 2x10s at 16 inches on center, joists with a span of 12 feet are permitted to have a maximum cantilever of 3 feet (see illustration, below).
