It is possible to vent a pellet stove either vertically or horizontally through the roof. Before venting horizontally through a side wall, it’s always a good idea to get some vertical rise with the L-vent pipe.
Table of Contents
How far can you horizontally vent a pellet stove?
There is a maximum horizontal run of four feet for vent pipes. Three-inch pipe can typically be run fifteen feet vertically.
Can a pellet stove be direct vented?
Most pellet stoves, like direct vent gas fireplaces, are vented horizontally through the wall to the outside. With a stainless steel inner wall and gaskets that seal tightly, pellet stove venting is pressurized.
Can you vent a pellet stove straight through the wall?
Wood-burning stoves must always be vented through the roof of your home, but pellet-burning stoves can be vented either vertically through the roof or horizontally through the wall to the outdoors. Both vertical and horizontal venting options are available on gas stoves.
Does a pellet stove have to be vented above the roof?
As a result, pellet stoves do not necessitate an above-roof vertical stack of piping for exhaust. Drilling may be necessary, but it’s a lot easier than installing wood-burning appliances, such as a fireplace or furnace, which require a vent pipe that goes through the roof.
How far away from the wall should a pellet stove be?
It is possible to place a pellet stove closer to combustibles than a wood stove or fireplace because the outer surface of a pellet stove does not get as hot as the surface of a wood stove or fireplace. For the most part, workers must stand on a 3/8-inch-thick or thicker noncombustible surface.
Does pellet stove need venting?
Is Ventilation Necessary for Pellet Stoves? In order to properly vent a pellet stove’s exhaust to the outside of a home, it must be done so through a masonry chimney, an internal chimney, or an external wall. Fresh air intake does not always necessitate a direct vent for pellet stoves.
Can you vent a fireplace sideways?
Venting a direct-vent fireplace can be done horizontally or through the roof, depending on your preference. Installing them is simple, and you can do it almost anywhere!
Do you need a chimney liner for a pellet stove?
To use with a masonry chimney when installing a pellet stove, a stainless steel liner is usually needed. The manufacturer’s instructions and local building codes must be followed when installing an internal or external pellet stove flue.
Can you use single wall pipe on a pellet stove?
For pellet stoves and inserts, never use “regular” single or double wall stove pipe. Using a regular stove pipe to heat your home with pellets creates a more corrosive environment, and it will not last long.
How high does a pellet stove pipe need to be?
It is recommended that the Pellet/Corn Chimney be no taller than 60 feet in height. At a height of 30 feet, a support is required.
