Table of Contents
How do you clean after using CitriStrip?
After you’ve removed the bulk of the debris, use mineral spirits and steel wool to thoroughly clean the surface so that it’s ready for painting. Scrub the surface thoroughly with finer 000 or 0000 steel wool and mineral spirits, then remove the residue with a cotton rag.
Can you clean up CitriStrip with water?
Mineral spirits, on the other hand, does not mix well with water-based products, such as paint. We recommend using Acetone to clean water-based products because it evaporates quickly and leaves no residue behind. Cleanse with a 50/50 mixture of denatured alcohol and water.
Can you use CitriStrip outdoors?
The gel adheres well to vertical surfaces, making it easier to remove multiple layers of paint both outdoors and indoors.
Can you leave Citristrip on too long?
Yes, Citristrip can be left on too long, as demonstrated above. If left wet for up to 24 hours, the paint and varnish stripping gel Citristrip, according to the manufacturer, will continue working to remove unwanted layers of paint and finish.
Can you clean Citristrip with vinegar?
White distilled vinegar can be heated in a microwave for 30 seconds and liberally applied to the surface with a brush or a rag. Make sure the vinegar has time to soak in! Remove the paint with a plastic scraper after 15 minutes.
Can you use denatured alcohol to clean CitriStrip?
Wax is contained within the CitriStrip Citrus Stripper to keep it from drying out after use. Using a water-based product to remove citrus strippers is a good idea. To clean with denatured alcohol and water, combine 50:50 Acetone and Acetone denatured alcohol.
Do I have to use mineral spirits after stripping?
If you’re using oil-based paints or alkyd paints that cannot be dissolved with water, mineral spirits can be used to remove any stray paint. Mineral spirits are a good choice unless you’re dealing with stubborn paint residue.
